Register and monitor external services with Consul ESM

Consul's service discovery features are a versatile solution for monitoring application health, tracking services and nodes, and keeping a current catalog of healthy service instances. When you register your services to Consul or monitor your application health with distributed checks, a Consul client agent runs on the same node as your service. This client agent performs service and node health checks for the Consul servers and provides a local interface with the Consul DNS service.

Consul binary releases support a wide range of platforms and architectures, allowing many kinds of services and nodes to join a datacenter. However, there are situations where it may not be possible to install a Consul agent on the node that hosts a service. In these situations, the node must run outside of the Consul datacenter. Examples of these external services include:

• third-party SaaS services, such as Amazon RDS or Azure Database for PostgreSQL
• legacy services that do not permit installing third-party software on the node
• services managed by other teams, where you do not have access to the underlying node

In this tutorial, you will learn how to register an external service to your Consul datacenter and make it discoverable using the Consul DNS interface. You will accomplish these tasks using Consul External Service Monitor (ESM), a tool that helps run health checks and update the status of those health checks in the catalog.

Tutorial scenario

This tutorial uses HashiCups, a demo coffee shop application made up of several microservices running on VMs.

Your Consul datacenter will interact with four HashiCups services:

• NGINX runs on a node named hashicups-nginx-0
• Frontend runs on a node named hashicups-frontend-0
• API runs on a node named hashicups-api-0
• Database runs on two nodes named hashicups-db-0 and hashicups-db-1

At the start of the tutorial, the NGINX, Frontend, and API services are already registered in Consul catalog and are discoverable by their downstream services with Consul DNS. The two instances of the database service are not registered in the Consul catalog because they run on external nodes that cannot join the datacenter.

As a result, the API service is configured to communicate with one of the database instances using its IP address.

The node consul-esm-0 is also registered with the Consul catalog, but starts with no services running.

Prerequisites

This tutorial assumes you are already familiar with Consul and its core functionalities. If you are new to Consul refer to refer to the Consul Getting Started tutorials collection.

If you want to follow along with this tutorial and you do not already have the required infrastructure in place, the following steps guide you through the process to deploy a demo application and a configured Consul service mesh on AWS automatically using Terraform.

To create a Consul deployment on AWS using Terraform, you need the following:

• An AWS account configured for use with Terraform
• aws-cli >= v2.0
• terraform >= v1.0
• consul >= v1.18.0

Clone GitHub repository

Clone the GitHub repository containing the configuration files and resources.

$ git clone https://github.com/hashicorp-education/learn-consul-external-services-vms

$ git clone git@github.com:hashicorp-education/learn-consul-external-services-vms.git

Enter the directory that contains the configuration files for this tutorial.

$ cd learn-consul-external-services-vm/self-managed/infrastructure/aws

Create infrastructure

With these Terraform configuration files, you are ready to deploy your infrastructure.

Issue the terraform init command from your working directory to download the necessary providers and initialize the backend.

$ terraform initInitializing the backend...Initializing provider plugins......Terraform has been successfully initialized!...

Then, deploy the resources. Confirm the run by entering yes.

$ terraform apply -var-file=../../ops/conf/monitor_external_services_with_consul_esm.tfvars## ...Do you want to perform these actions? Terraform will perform the actions described above. Only 'yes' will be accepted to approve. Enter a value: yes## ...Apply complete! Resources: 50 added, 0 changed, 0 destroyed.

After the deployment is complete, Terraform returns a list of outputs you can use to interact with the newly created environment.

Outputs:connection_string = "ssh -i certs/id_rsa.pem admin@`terraform output -raw ip_bastion`"ip_bastion = "<redacted-output>"remote_ops = "export BASTION_HOST=<redacted-output>"retry_join = "provider=aws tag_key=ConsulJoinTag tag_value=auto-join-hcoc"ui_consul = "https://<redacted-output>:8443"ui_grafana = "http://<redacted-output>:3000/d/hashicups/hashicups"ui_hashicups = "http://<redacted-output>"

The Terraform outputs provide useful information, including the bastion host IP address. The following is a brief description of the Terraform outputs:

• The ip_bastion provides IP address of the bastion host you use to run the rest of the commands in this tutorial.
• The remote_ops lists the bastion host IP, which you can use access the bastion host.
• The retry_join output lists Consul's retry_join configuration parameter.
• The ui_consul output lists the Consul UI address. The Consul UI is not currently running. You will use the Consul UI in this tutorial to verify services registered in your catalog.
• The ui_grafana output lists the Grafana UI address. You will not use this address in this tutorial.
• The ui_hashicups output lists the HashiCups UI address. You can open this address in a web browser to verify the HashiCups demo application is running properly.

Check initial state in Consul UI

Retrieve the Consul UI address from Terraform.

$ terraform output -raw ui_consul

Open the address in a browser.

After accepting the certificate presented by the Consul server, you will land on the Services page.

Notice that the Services page only shows the Consul service and three services for the HashiCups application. The Database service is not registered in the Consul catalog.

Click on the Nodes tab.

The Database nodes do not appear. The consul-esm-0 node appears because a properly configured Consul client agent is already running on the node, even though there is no service running.

Login into the bastion host VM

Login to the bastion host using ssh.

$ ssh -i certs/id_rsa.pem admin@`terraform output -raw ip_bastion`#...admin@bastion:~$

Configure CLI to interact with Consul

Configure your bastion host to communicate with your Consul environment using the two dynamically generated environment variable files.

$ source "/home/admin/assets/scenario/env-scenario.env" && \  source "/home/admin/assets/scenario/env-consul.env"

After loading the needed variables, verify you can connect to your Consul datacenter.

$ consul membersNode                  Address          Status  Type    Build   Protocol  DC   Partition  Segmentconsul-server-0       172.21.0.7:8301  alive   server  1.18.1  2         dc1  default    <all>consul-esm-0          172.21.0.6:8301  alive   client  1.18.1  2         dc1  default    <default>hashicups-api-0       172.21.0.2:8301  alive   client  1.18.1  2         dc1  default    <default>hashicups-frontend-0  172.21.0.4:8301  alive   client  1.18.1  2         dc1  default    <default>hashicups-nginx-0     172.21.0.9:8301  alive   client  1.18.1  2         dc1  default    <default>

Verify downstream service configuration

The hashicups-db service instances are not part of Consul catalog. This means the upstream services that need to connect to them must use their IP address. Verify the configuration for the hashicups-api service instance.

Login to hashicups-api-0 from the bastion host.

$ ssh -i certs/id_rsa hashicups-api-0#..admin@hashicups-api-0:~

Verify hashicups-api application configuration.

$ cat ~/conf.json{  "db_connection": "host=172.21.0.8 port=5432 user=hashicups password=hashicups_pwd dbname=products sslmode=disable",  "bind_address": ":9090",  "metrics_address": ":9103"}

The host value for the db_connection is set to the IP address of one of the hashicups-db instances. As a result, the HashiCups application is unable to scale by using multiple instances of the Database service, and it is prone to errors if the IP address of the instance changes.

To continue with the tutorial, exit the SSH session to return to the bastion host.

$ exitlogoutConnection to hashicups-api-0 closed.admin@bastion:~$

Register external services

In the context of Consul, external services run on nodes where you cannot run a local Consul agent. These nodes might be inside your infrastructure but not directly configurable, such as with a mainframe, virtual appliance, or an unsupported platform. These nodes can also be outside of your infrastructure, such as with a SaaS platform. When registering an external service, it is also necessary to register the node it runs on.

For this reason, the configuration for an external service registered directly with the catalog is slightly different than the one for an internal service registered by an agent. Because this scenario contains two hashicups-db nodes, you will create two configuration files for the two different nodes and services.

Create the service configuration files

Create the folder that will contain the external service definition.

$ mkdir -p ~/assets/scenario/conf/external-services

Retrieve the IP address for the hashicups-db-0 node.

$ export IP_HASHICUPS_DB_0=`getent hosts hashicups-db-0 | awk '{print $1}'`

Then, create the configuration for hashicups-db-0 that includes the networking information, service definition, and health check to run.

$ tee ~/assets/scenario/conf/external-services/hashicups-db-0.json > /dev/null << EOF{  "Datacenter": "$CONSUL_DATACENTER",  "Node": "hashicups-db-0-ext",  "ID": "`cat /proc/sys/kernel/random/uuid`",  "Address": "${IP_HASHICUPS_DB_0}",  "NodeMeta": {    "external-node": "true",    "external-probe": "true"  },  "Service": {    "ID": "hashicups-db-0",    "Service": "hashicups-db",    "Tags": [      "external",      "inst_0"    ],    "Address": "${IP_HASHICUPS_DB_0}",    "Port": 5432  },  "Checks": [{    "CheckID": "hashicups-db-0-check",    "Name": "hashicups-db check",    "Status": "passing",    "ServiceID": "hashicups-db-0",    "Definition": {      "TCP": "${IP_HASHICUPS_DB_0}:5432",      "Interval": "5s",      "Timeout": "1s",      "DeregisterCriticalServiceAfter": "60m"     }  }]}EOF

Complete the same process for hashicups-db-1. Retrieve the IP address of the node.

$ export IP_HASHICUPS_DB_1=`getent hosts hashicups-db-1 | awk '{print $1}'`

Finally, create the configuration for hashicups-db-1 node with relative service and health checks.

$ tee ~/assets/scenario/conf/external-services/hashicups-db-1.json > /dev/null << EOF{  "Datacenter": "$CONSUL_DATACENTER",  "Node": "hashicups-db-1-ext",  "ID": "`cat /proc/sys/kernel/random/uuid`",  "Address": "${IP_HASHICUPS_DB_1}",  "NodeMeta": {    "external-node": "true",    "external-probe": "true"  },  "Service": {    "ID": "hashicups-db-1",    "Service": "hashicups-db",    "Tags": [      "external",      "inst_1"    ],    "Address": "${IP_HASHICUPS_DB_1}",    "Port": 5432  },  "Checks": [{    "CheckID": "hashicups-db-1-check",    "Name": "hashicups-db check",    "Status": "passing",    "ServiceID": "hashicups-db-1",    "Definition": {      "TCP": "${IP_HASHICUPS_DB_1}:5432",      "Interval": "5s",      "Timeout": "1s",      "DeregisterCriticalServiceAfter": "60m"     }  }]}EOF

Observe the following details in this configuration:

• Because you are defining a node that does not have a local Consul agent, you must include the Datacenter value so that Consul knows where to register the node and service.
• The node is identified using the Node, ID, and Address parameters.
• The NodeMeta parameter is necessary for consul-esm to identify the external nodes that will require periodic health checks.
  • For Consul ESM to detect external nodes and health checks, set "external-node": "true" in the node metadata before you register it.
  • The external-probe field determines if Consul ESM performs regular pings to the node to update its health status.
• The Status field inside the Checks section is set to passing. When registering a service, Consul sets the initial status to critical and then updates the status after it performs its first health check. In the case of external services, since no health check is performed until consul-esm is running, the service will remain in the critical state until you start consul-esm process. For the scope of this tutorial, you will register the service with an initial state of passing so that you can avoid downtime in the application. However, we recommend that you register services with a critical health status in production environments to ensure that service instances are healthy before Consul can route traffic to them.

For a full list of service configuration parameters refer to Services configuration reference and Health check configuration reference.

Register the external services in the Consul catalog

Register the nodes in Consul catalog using the /v1/catalog/register endpoint. First, register hashicups-db-0.

$ curl --silent \    --header "X-Consul-Token: $CONSUL_HTTP_TOKEN" \    --connect-to server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443:consul-server-0:8443 \    --cacert ${CONSUL_CACERT} \    --data @/home/admin/assets/scenario/conf/external-services/hashicups-db-0.json \    --request PUT \    https://server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443/v1/catalog/register

If the registration is performed correctly the command will output true.

Then, register hashicups-db-1.

$ curl --silent \    --header "X-Consul-Token: $CONSUL_HTTP_TOKEN" \    --connect-to server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443:consul-server-0:8443 \    --cacert ${CONSUL_CACERT} \    --data @/home/admin/assets/scenario/conf/external-services/hashicups-db-1.json \    --request PUT \    https://server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443/v1/catalog/register

If the registration is performed correctly the command will output true.

Verify service and node registration

After you register the services and nodes, you can verify they are present in the Consul catalog.

$ consul catalog nodes -detailedNode                  ID                                    Address     DC   TaggedAddresses                                                           Metaconsul-esm-0          3993c409-ab35-80a9-f4f7-8cb3f3e9085b  172.21.0.4  dc1  lan=172.21.0.4, lan_ipv4=172.21.0.4, wan=172.21.0.4, wan_ipv4=172.21.0.4  consul-network-segment=, consul-version=1.18.1consul-server-0       885bdc1d-b58f-9cc4-1df1-1c68a0605e41  172.21.0.5  dc1  lan=172.21.0.5, lan_ipv4=172.21.0.5, wan=172.21.0.5, wan_ipv4=172.21.0.5  consul-network-segment=, consul-version=1.18.1hashicups-api-0       3d15d86e-4e82-0c1b-0210-a0302f439565  172.21.0.8  dc1  lan=172.21.0.8, lan_ipv4=172.21.0.8, wan=172.21.0.8, wan_ipv4=172.21.0.8  consul-network-segment=, consul-version=1.18.1hashicups-db-0-ext    f8d9e662-37da-4810-a374-6a77e8024c4c  172.21.0.6  dc1                                                                            external-node=true, external-probe=truehashicups-db-1-ext    7800e840-d65c-4f4c-b29a-29e7331306df  172.21.0.9  dc1                                                                            external-node=true, external-probe=truehashicups-frontend-0  a6ccbdad-39c2-e132-aef6-9be1271822ad  172.21.0.2  dc1  lan=172.21.0.2, lan_ipv4=172.21.0.2, wan=172.21.0.2, wan_ipv4=172.21.0.2  consul-network-segment=, consul-version=1.18.1hashicups-nginx-0     a9789d6b-ea74-7f18-67d0-50ee26838ed7  172.21.0.7  dc1  lan=172.21.0.7, lan_ipv4=172.21.0.7, wan=172.21.0.7, wan_ipv4=172.21.0.7  consul-network-segment=, consul-version=1.18.1

$ consul catalog services -tagsconsulhashicups-api           inst_0hashicups-db            external,inst_0,inst_1hashicups-frontend      inst_0hashicups-nginx         inst_0

$ curl --silent \   --header "X-Consul-Token: $CONSUL_HTTP_TOKEN" \   --connect-to server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443:consul-server-0:8443 \   --cacert ${CONSUL_CACERT} \   https://server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443/v1/catalog/nodes | jq -r .

[  ## ...  {    "ID": "f8d9e662-37da-4810-a374-6a77e8024c4c",    "Node": "hashicups-db-0-ext",    "Address": "172.21.0.6",    "Datacenter": "dc1",    "TaggedAddresses": null,    "Meta": {      "external-node": "true",      "external-probe": "true"    },    "CreateIndex": 314,    "ModifyIndex": 314  },  {    "ID": "7800e840-d65c-4f4c-b29a-29e7331306df",    "Node": "hashicups-db-1-ext",    "Address": "172.21.0.9",    "Datacenter": "dc1",    "TaggedAddresses": null,    "Meta": {      "external-node": "true",      "external-probe": "true"    },    "CreateIndex": 317,    "ModifyIndex": 317  },  ## ...]

$ curl --silent \   --header "X-Consul-Token: $CONSUL_HTTP_TOKEN" \   --connect-to server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443:consul-server-0:8443 \   --cacert ${CONSUL_CACERT} \   https://server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443/v1/catalog/services | jq -r .

{  "consul": [],  "hashicups-api": [    "inst_0"  ],  "hashicups-db": [    "inst_0",    "inst_1",    "external"  ],  "hashicups-frontend": [    "inst_0"  ],  "hashicups-nginx": [    "inst_0"  ]}

$ terraform output -raw ui_consul

Verify domain name resolution and load balancing

Once the service is present in the Consul catalog, Consul DNS interface will be able to resolve the service correctly.

Login to hashicups-api-0 from the bastion host.

$ ssh -i certs/id_rsa hashicups-api-0#..admin@hashicups-api-0:~

Verify that you can resolve all instances of hashicups-db services using Consul DNS interface.

$ dig hashicups-db.service.dc1.consul ; <<>> DiG 9.18.24-1-Debian <<>> hashicups-db.service.dc1.consul;; global options: +cmd;; Got answer:;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44982;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION:; EDNS: version: 0, flags:; udp: 1232;; QUESTION SECTION:;hashicups-db.service.dc1.consul. IN    A ;; ANSWER SECTION:hashicups-db.service.dc1.consul. 0 IN   A   172.21.0.5hashicups-db.service.dc1.consul. 0 IN   A   172.21.0.8 ;; Query time: 0 msec;; SERVER: 172.21.0.7#53(172.21.0.7) (UDP);; WHEN: Wed May 22 14:11:42 UTC 2024;; MSG SIZE  rcvd: 92

Notice the dig command returns two IPs. Consul will load balance requests across all available instances of the service.

Verify that you can resolve hashicups-db-0-ext node using Consul.

$ dig hashicups-db-0-ext.node.dc1.consul ; <<>> DiG 9.16.48-Debian <<>> hashicups-db-0-ext.node.dc1.consul;; global options: +cmd;; Got answer:;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 60590;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION:; EDNS: version: 0, flags:; udp: 65494;; QUESTION SECTION:;hashicups-db-0-ext.node.dc1.consul. IN A ;; ANSWER SECTION:hashicups-db-0-ext.node.dc1.consul. 0 IN A  10.0.4.159 ;; Query time: 0 msec;; SERVER: 127.0.0.53#53(127.0.0.53);; WHEN: Thu Jun 06 14:35:58 UTC 2024;; MSG SIZE  rcvd: 79

Verify you can connect to the first instance of hashicups-db service using Consul FQDN.

$ PGPASSWORD=hashicups_pwd \    psql -P pager=off \        -d products \        -U hashicups \        -h inst_0.hashicups-db.service.dc1.consul \        -c "select * from coffees;"

Your output should appear similar to the following example:

 id |        name         |                            teaser                            | collection  |   origin    |  color  | description | price |     image      |     created_at      |     updated_at      | deleted_at ----+---------------------+--------------------------------------------------------------+-------------+-------------+---------+-------------+-------+----------------+---------------------+---------------------+------------  1 | HCP Aeropress       | Automation in a cup                                          | Foundations | Summer 2020 | #444    |             |   200 | /hashicorp.png | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   2 | Packer Spiced Latte | Packed with goodness to spice up your images                 | Origins     | Summer 2013 | #1FA7EE |             |   350 | /packer.png    | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   3 | Vaulatte            | Nothing gives you a safe and secure feeling like a Vaulatte  | Foundations | Spring 2015 | #FFD814 |             |   200 | /vault.png     | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   4 | Nomadicano          | Drink one today and you will want to schedule another        | Foundations | Fall 2015   | #00CA8E |             |   150 | /nomad.png     | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   5 | Terraspresso        | Nothing kickstarts your day like a provision of Terraspresso | Origins     | Summer 2014 | #894BD1 |             |   150 | /terraform.png | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   6 | Vagrante espresso   | Stdin is not a tty                                           | Origins     | 2010        | #0E67ED |             |   200 | /vagrant.png   | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   7 | Connectaccino       | Discover the wonders of our meshy service                    | Origins     | Spring 2014 | #F44D8A |             |   250 | /consul.png    | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   8 | Boundary Red Eye    | Perk up and watch out for your access management             | Discoveries | Fall 2020   | #F24C53 |             |   200 | /boundary.png  | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 |   9 | Waypointiato        | Deploy with a little foam                                    | Discoveries | Fall 2020   | #14C6CB |             |   250 | /waypoint.png  | 2024-05-22 00:00:00 | 2024-05-22 00:00:00 | (9 rows)

To continue with the tutorial, exit the SSH session to return to the bastion host.

$ exitlogoutConnection to hashicups-api-0 closed.admin@bastion:~$

You will now stop one instance of the hashicups-db service and verify Consul behavior.

Login to hashicups-db-0 from the bastion host.

$ ssh -i certs/id_rsa hashicups-db-0#..admin@hashicups-db-0:~

Stop the first instance of hashicups-db service instance.

$ ./start_service.sh stopStop pre-existing instances.Service instance stopped.

To continue with the tutorial, exit the SSH session to return to the bastion host.

$ exitlogoutConnection to hashicups-db-0 closed.admin@bastion:~$

Login to hashicups-api-0 from the bastion host.

$ ssh -i certs/id_rsa hashicups-api-0#..admin@hashicups-api-0:~

Verify available instances of hashicups-db services using Consul.

Notice the dig command still returns two IPs. This is because health checks are not performed periodically.

$ dig hashicups-db.service.dc1.consul ; <<>> DiG 9.18.24-1-Debian <<>> hashicups-db.service.dc1.consul;; global options: +cmd;; Got answer:;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 42128;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION:; EDNS: version: 0, flags:; udp: 1232;; QUESTION SECTION:;hashicups-db.service.dc1.consul. IN    A ;; ANSWER SECTION:hashicups-db.service.dc1.consul. 0 IN   A   172.21.0.5hashicups-db.service.dc1.consul. 0 IN   A   172.21.0.8 ;; Query time: 0 msec;; SERVER: 172.21.0.7#53(172.21.0.7) (UDP);; WHEN: Wed May 22 14:11:42 UTC 2024;; MSG SIZE  rcvd: 92

Verify your connection to the hashicups-db-0-ext service instance.

$ PGPASSWORD=hashicups_pwd \    psql -P pager=off \        -d products \        -U hashicups \        -h inst_0.hashicups-db.service.dc1.consul \        -c "select * from coffees;"

This time the command fails. This failure occurs because Consul has not performed a health check on the service instance yet, so it is still marked as healthy in the catalog.

psql: error: connection to server at "inst_0.hashicups-db.service.dc1.consul" (172.21.0.6), port 5432 failed: Connection refused    Is the server running on that host and accepting TCP/IP connections?

To continue with the tutorial, exit the SSH session to return to the bastion host.

$ exitlogoutConnection to hashicups-api-0 closed.admin@bastion:~$

This completes the first part of the tutorial, where you learned how to register external services with Consul. You also learned how to verify that external services are resolved using the Consul DNS interface. Finally, you learned that you cannot rely on the Consul catalog to return healthy instances of external services.

In the next section of the tutorial you will introduce consul-esm in your datacenter and use it to periodically check the health of your external services.

Create ACL token for Consul ESM

Consul ESM requires access to several Consul resources to operate properly:

• agent:read - to check version compatibility and calculate network coordinates.
• key:write - to store assigned health checks, the path is defined in the configuration file.
• node:write - to update the status of each node that consul-esm monitors.
• node:read - to retrieve list of nodes that need to be monitored.
• service:write - to register consul-esm service defined in the configuration file.
• session:write - to acquire consul-esm cluster leader lock.

When configuring the ACL policy for consul-esm, you can decide whether to assign fine-tuned permissions to the token to grant permissions to the specific services and nodes you want to monitor, or to use a more permissive ACL policy that permits consul-esm to monitor newly added services without the need to modify specific ACL permissions.

$ tee ~/assets/scenario/conf/acl-policy-consul-esm-strict.hcl > /dev/null << EOF # To check version compatibility and calculating network coordinates# Requires at least read for the agent API for the Consul node # where consul-esm is registeredagent "consul-esm-0" {  policy = "read"} # To store assigned checkskey_prefix "consul-esm/" {  policy = "write"} # To update the status of each node monitored by consul-esm# Requires one acl block per nodenode_prefix "hashicups-db" {  policy = "write"} # To retrieve nodes that need to be monitorednode_prefix "" {  policy = "read"} # To register consul-esm serviceservice_prefix "consul-esm" {  policy = "write"} # To update health status for external service hashicups-dbservice "hashicups-db" {  policy = "write"} # To acquire consul-esm cluster leader lock when used in HA modesession "consul-esm-0" {   policy = "write"}EOF 

$ consul acl policy create \    -name 'acl-policy-consul-esm-strict' \    -description 'Policy for consul-esm' \    -rules @/home/admin/assets/scenario/conf/acl-policy-consul-esm-strict.hcl  > /dev/null 2>&1

$ consul acl token create \    -description 'consul-esm token' \    -policy-name acl-policy-consul-esm-strict \    --format json > /home/admin/assets/scenario/conf/secrets/acl-token-consul-esm.json 2> /dev/null

$ tee ~/assets/scenario/conf/acl-policy-consul-esm-permissive.hcl > /dev/null << EOF# To check version compatibility and calculating network coordinatesagent_prefix "" {  policy = "read"} # To store assigned checkskey_prefix "consul-esm/" {  policy = "write"} # To update the status of each node that consul-esm monitorsnode_prefix "" {  policy = "write"} # To register consul-esm serviceservice_prefix "" {  policy = "write"} # To acquire consul-esm cluster leader lock when used in HA modesession_prefix "" {   policy = "write"}EOF

$ consul acl policy create \    -name 'acl-policy-consul-esm-permissive' \    -description 'Policy for consul-esm' \    -rules @/home/admin/assets/scenario/conf/acl-policy-consul-esm-permissive.hcl  > /dev/null 2>&1

$ consul acl token create \    -description 'consul-esm token' \    -policy-name acl-policy-consul-esm-permissive \    --format json > /home/admin/assets/scenario/conf/secrets/acl-token-consul-esm.json 2> /dev/null

After you create the token, export it in an environment variable.

$ export CONSUL_ESM_TOK=`cat /home/admin/assets/scenario/conf/secrets/acl-token-consul-esm.json  | jq -r ".SecretID"` 

Configure Consul ESM

After you create the ACL token for the consul-esm agent, create the configuration file.

$ tee ~/assets/scenario/conf/consul-esm-0/consul-esm-config.hcl > /dev/null << EOFlog_level = "DEBUG" log_json = false instance_id = "`cat /proc/sys/kernel/random/uuid`" consul_service = "consul-esm" consul_kv_path = "consul-esm/" external_node_meta {    "external-node" = "true"} node_reconnect_timeout = "72h" node_probe_interval = "10s" disable_coordinate_updates = false http_addr = "localhost:8500" token = "${CONSUL_ESM_TOK}" datacenter = "${CONSUL_DATACENTER}" client_address = "127.0.0.1:8080" ping_type = "udp" passing_threshold = 0 critical_threshold = 0EOF

For a full configuration reference refer to Consul ESM configuration.

Copy the configuration file on the consul-esm-0 node.

$ rsync -av \    -e "ssh -i /home/admin/certs/id_rsa" \    /home/admin/assets/scenario/conf/consul-esm-0/consul-esm-config.hcl \    admin@consul-esm-0:/home/admin/consul-esm-config.hcl

That output should be similar to the following example.

sending incremental file listconsul-esm-config.hclsent 626 bytes  received 35 bytes  1,322.00 bytes/sectotal size is 504  speedup is 0.76

Start Consul ESM

To start Consul ESM, log in to consul-esm-0 from the bastion host.

$ ssh -i certs/id_rsa consul-esm-0#..admin@consul-esm-0:~

Verify that Consul ESM the configuration was copied to the node correctly.

$ cat /home/admin/consul-esm-config.hcl

log_level = "DEBUG" log_json = false instance_id = "e6564d2e-2bda-442a-b4e6-5f59dd5e8185" consul_service = "consul-esm" consul_kv_path = "consul-esm/" external_node_meta {    "external-node" = "true"} node_reconnect_timeout = "72h" node_probe_interval = "10s" disable_coordinate_updates = false http_addr = "localhost:8500" token = "14392d0b-e418-e713-fa40-0dc96e961b7d" datacenter = "dc1" client_address = "127.0.0.1:8080" ping_type = "udp" passing_threshold = 0 critical_threshold = 0

After you confirm that the configuration is correct, start consul-esm to run as a long-lived process.

$ consul-esm -config-file=consul-esm-config.hcl > /tmp/consul-esm.log  2>&1 &

The process starts in the background. You can check the logs for the process in the log file specified in the configuration.

$ cat /tmp/consul-esm*.log

[INFO]  consul-esm: Connecting to Consul: address=localhost:8500[WARN]  consul-esm: unable to determine Consul server version, check for compatibility; requires >= 1.4.1[DEBUG] consul-esm: Consul agent and all servers are running compatible versions with ESMConsul ESM running!            Datacenter: "dc1"               Service: "consul-esm"           Service Tag: ""            Service ID: "consul-esm:a8c7d327-3cd1-4123-85c9-f25dfe23635a"Node Reconnect Timeout: "72h0m0s"   Disable coordinates: false        Statsd address: ""         Metrix prefix: ""Log data will now stream in as it occurs:[DEBUG] consul-esm: Registered ESM service with Consul[INFO]  consul-esm: Trying to obtain leadership...[INFO]  consul-esm: Obtained leadership[INFO]  consul-esm: Updating external node list: items=2[INFO]  consul-esm: Rebalanced external nodes across ESM instances: nodes=2 instances=1[INFO]  consul-esm: Fetched nodes from catalog: count=2[DEBUG] consul-esm: Now waiting between node pings: time=5s[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="hashicups-db check"[DEBUG] consul-esm: Added TCP check: checkHash=hashicups-db-0-ext/hashicups-db-0/hashicups-db-0-check[DEBUG] consul-esm: Added TCP check: checkHash=hashicups-db-1-ext/hashicups-db-1/hashicups-db-1-check[INFO]  consul-esm: Updated checks: count=2 found=2 added=2 updated=0 removed=0[INFO]  consul-esm: Health check counts changed: healthChecks=2 nodes=2[DEBUG] consul-esm: Check status updated: check=hashicups-db-1-ext/hashicups-db-1/hashicups-db-1-check status=passing[WARN]  consul-esm: Check socket connection failed: check=hashicups-db-0-ext/hashicups-db-0/hashicups-db-0-check error="dial tcp 172.21.0.6:5432: connect: connection refused"[WARN]  consul-esm: Check is now critical: check=hashicups-db-0-ext/hashicups-db-0/hashicups-db-0-check##...

To continue with the tutorial, exit the SSH session to return to the bastion host.

$ exitlogoutConnection to consul-esm-0 closed.admin@bastion:~$

Verify service state and load balancing

After Consul ESM starts, verify the UI starts showing a failing instance of hashicups-db service.

Also notice that a new service, consul-esm, is now present in Consul catalog.

When the health check marks the service instance as failing, Consul DNS will stop including the instance in the results.

Login to hashicups-db-0 from the bastion host.

$ for i in `seq 1 100` ; do \    dig @consul-server-0 -p 8600  hashicups-db.service.dc1.consul +short | head -1; \  done | sort | uniq -c

The output should appear similar to the following example. You may notice that all request are now forwarded to the healthy instance.

     100 172.21.0.5

To confirm that Consul ESM reacts to changes in service state, you will now restart the hashicups-db instance.

Login to hashicups-db-0 from the bastion host.

$ ssh -i certs/id_rsa hashicups-db-0#..admin@hashicups-db-0:~

Start the hashicups-db instance.

$ ./start_service.sh start --consulStop pre-existing instances.START - Start services on all interfaces.START CONSUL - Starts the service using Consul service name for upstream services (using LB functionality).NOT APPLICABLE FOR THIS SERVICE - No Upstreams to define.Start service instance.Reloading config to listen on all available interfaces.

To continue with the tutorial, exit the SSH session to return to the bastion host.

$ exitlogoutConnection to hashicups-db-0 closed.admin@bastion:~$

Log in to hashicups-api-0 from the bastion host.

$ ssh -i certs/id_rsa hashicups-api-0#..admin@hashicups-api-0:~

Verify that you can resolve all instances of hashicups-db services using Consul.

$ dig hashicups-db.service.dc1.consul ; <<>> DiG 9.18.24-1-Debian <<>> hashicups-db.service.dc1.consul;; global options: +cmd;; Got answer:;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 50874;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1 ;; OPT PSEUDOSECTION:; EDNS: version: 0, flags:; udp: 1232;; QUESTION SECTION:;hashicups-db.service.dc1.consul. IN    A ;; ANSWER SECTION:hashicups-db.service.dc1.consul. 0 IN   A   172.21.0.8hashicups-db.service.dc1.consul. 0 IN   A   172.21.0.5 ;; Query time: 0 msec;; SERVER: 172.21.0.7#53(172.21.0.7) (UDP);; WHEN: Wed May 22 14:11:58 UTC 2024;; MSG SIZE  rcvd: 92

Notice the dig command returns two IPs. Consul will load balance requests across all available instances of the service.

The same information can be retrieved from Consul UI, where the hashicups-db service now shows two healthy instances.

Now that Consul ESM takes care of the health monitoring for the external services, you can use Consul service discovery to configure your downstream services.

Restart hashicups-api to use Consul FQDN instead of IP addresses.

$ ./start_service.sh start --consulStop pre-existing instances.hashicups-api-paymentshashicups-api-producthashicups-api-publicSTART - Start services on all interfaces.START CONSUL - Starts the service using Consul service name for upstream services (using LB functionality).Start service instance.Service started to listen on all available interfaces.{    "db_connection": "host=hashicups-db.service.dc1.consul port=5432 user=hashicups password=hashicups_pwd dbname=products sslmode=disable",    "bind_address": ":9090",    "metrics_address": ":9103"}bc46f6e4c7267bb1a266135cd19504b6167f4bafac0ea583036122ced11c7fa235fc5b73a599d807bcb50fe7e26e52f0d7145b0a4c08d9c7065aef98b67f6f3f170a050675ba637f2db8f8d09de5ecb4c6a525f5085b972448594c5cba438cc4

From the output you can verify that now the host parameter for the DB connection is set to hashicups-db.service.dc1.consul

To continue with the tutorial, exit the ssh session to return to the bastion host.

$ exitlogoutConnection to hashicups-api-0 closed.admin@bastion:~$

Monitor an HTTP endpoint with Consul ESM

Some application deployments rely on external HTTP endpoints to retrieve deploy information. These endpoints are usually considered always-on and are not monitored inside the deploy workflow. As a result, errors may occur when a failure in the remote endpoint happens.

Registering these endpoints in the Consul catalog and monitoring them with Consul ESM allows you to standardize your processes and leverage additional Consul features, such as watches and events, to build more resilient workflows.

For example, HashiCorp supports the releases.hashicorp.com and checkpoint.hashicorp.com endpoints. These endpoints are often integrated in the tool installation process when version information is required.

You will now learn how to register those endpoints in Consul and to monitor their health using Consul ESM.

Generate a UUID to use as node ID for the external services.

$ export RANDOM_UUID=`cat /proc/sys/kernel/random/uuid`

Create the service definition for an external node with the relative services and health checks configured. First, for releases.hashicorp.com:

$ tee ~/assets/scenario/conf/external-services/hashicorp-releases.json > /dev/null << EOF{  "Datacenter": "$CONSUL_DATACENTER",  "Node": "hashicorp",  "ID": "${RANDOM_UUID}",  "Address": "hashicorp.com",  "NodeMeta": {    "external-node": "true"  },  "Service": {    "ID": "releases.hashicorp.com",    "Service": "hashicorp-releases",    "Tags": [      "external",      "deploy"    ],    "Address": "releases.hashicorp.com",    "Port": 443  },  "Checks": [{    "CheckID": "releases.hashicorp.com",    "Name": "releases.hashicorp.com check",    "Status": "warning",    "ServiceID": "releases.hashicorp.com",    "Definition": {      "http": "https://releases.hashicorp.com",      "Interval": "30s",      "Timeout": "10s"     }  }]}EOF

Then, for checkpoint.hashicorp.com:

$ tee ~/assets/scenario/conf/external-services/hashicorp-checkpoint.json > /dev/null << EOF{  "Datacenter": "$CONSUL_DATACENTER",  "Node": "hashicorp",  "ID": "${RANDOM_UUID}",  "Address": "hashicorp.com",  "NodeMeta": {    "external-node": "true"  },  "Service": {    "ID": "checkpoint.hashicorp.com",    "Service": "hashicorp-checkpoint",    "Tags": [      "external",      "deploy"    ],    "Address": "checkpoint.hashicorp.com",    "Port": 443  },  "Checks": [{    "CheckID": "checkpoint.hashicorp.com",    "Name": "checkpoint.hashicorp.com check",    "Status": "warning",    "ServiceID": "checkpoint.hashicorp.com",    "Definition": {      "http": "https://checkpoint.hashicorp.com",      "Interval": "30s",      "Timeout": "10s"     }  }]}EOF

Register releases.hashicorp.com.

$ curl --silent \    --header "X-Consul-Token: $CONSUL_HTTP_TOKEN" \    --connect-to server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443:consul-server-0:8443 \    --cacert ${CONSUL_CACERT} \    --data @/home/admin/assets/scenario/conf/external-services/hashicorp-checkpoint.json \    --request PUT \    https://server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443/v1/catalog/register

The command outputs true when the registration is performed correctly.

Register checkpoint.hashicorp.com.

$ curl --silent \    --header "X-Consul-Token: $CONSUL_HTTP_TOKEN" \    --connect-to server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443:consul-server-0:8443 \    --cacert ${CONSUL_CACERT} \    --data @/home/admin/assets/scenario/conf/external-services/hashicorp-releases.json \    --request PUT \    https://server.${CONSUL_DATACENTER}.${CONSUL_DOMAIN}:8443/v1/catalog/register

The command outputs true when the registration is performed correctly.

Update ACL permissions for Consul ESM

If you assigned strict permissions to the Consul ESM ACL token, you must update the token to include permissions for the new nodes and services.

$ tee ~/assets/scenario/conf/acl-policy-consul-esm-strict-addendum.hcl > /dev/null << EOF# To check version compatibility and calculating network coordinates# Requires at least read for the agent API for the Consul node # where consul-esm is registeredagent "consul-esm-0" {  policy = "read"} # To store assigned checkskey_prefix "consul-esm/" {  policy = "write"} # To update the status of each node monitored by consul-esm# Requires one acl block per nodenode_prefix "hashicups-db" {  policy = "write"} node_prefix "hashicorp" {  policy = "write"} # To retrieve nodes that need to be monitorednode_prefix "" {  policy = "read"} # To register consul-esm serviceservice_prefix "consul-esm" {  policy = "write"} service "hashicups-db" {  policy = "write"} service_prefix "hashicorp-" {  policy = "write"} # To acquire consul-esm cluster leader lock when used in HA modesession "consul-esm-0" {   policy = "write"}EOF

$ consul acl policy update \    -name "acl-policy-consul-esm-strict" \    -rules @/home/admin/assets/scenario/conf/acl-policy-consul-esm-strict-addendum.hcl > /dev/null 2>&1

With the right ACL permissions, Consul ESM will automatically pick the new services from Consul catalog and retrieve the health checks to perform. The Consul ESM logs will show some information regarding the update.

To inspect Consul ESM logs, login to consul-esm-0 from the bastion host.

$ ssh -i certs/id_rsa consul-esm-0#..admin@consul-esm-0:~

Logs for Consul ESM are stored in the /tmp folder.

$ cat /tmp/consul-esm*.log

## ...[INFO]  consul-esm: Updating external node list: items=3[INFO]  consul-esm: Fetched nodes from catalog: count=3## ...[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="checkpoint.hashicorp.com check"[INFO]  consul-esm: found check: name="releases.hashicorp.com check"[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="hashicups-db check"[DEBUG] consul-esm: Added HTTP check: checkHash=hashicorp/checkpoint.hashicorp.com/checkpoint.hashicorp.com[DEBUG] consul-esm: Added HTTP check: checkHash=hashicorp/releases.hashicorp.com/releases.hashicorp.com[INFO]  consul-esm: Updated checks: count=4 found=4 added=2 updated=0 removed=0[INFO]  consul-esm: Health check counts changed: healthChecks=4 nodes=3[INFO]  consul-esm: found check: name="checkpoint.hashicorp.com check"[INFO]  consul-esm: found check: name="releases.hashicorp.com check"[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="hashicups-db check"## ...[INFO]  consul-esm: Fetched nodes from catalog: count=3## ...[DEBUG] consul-esm: Check status updated: check=hashicorp/checkpoint.hashicorp.com/checkpoint.hashicorp.com status=passing[INFO]  consul-esm: Updating output and status for: checkID=checkpoint.hashicorp.com[INFO]  consul-esm: found check: name="checkpoint.hashicorp.com check"[INFO]  consul-esm: found check: name="releases.hashicorp.com check"[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="checkpoint.hashicorp.com check"[INFO]  consul-esm: found check: name="releases.hashicorp.com check"[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="hashicups-db check"## ...[DEBUG] consul-esm: Check status updated: check=hashicorp/releases.hashicorp.com/releases.hashicorp.com status=passing[INFO]  consul-esm: Updating output and status for: checkID=releases.hashicorp.com[INFO]  consul-esm: found check: name="checkpoint.hashicorp.com check"[INFO]  consul-esm: found check: name="releases.hashicorp.com check"[INFO]  consul-esm: found check: name="hashicups-db check"[INFO]  consul-esm: found check: name="hashicups-db check"[DEBUG] consul-esm: Check status updated: check=hashicups-db-1-ext/hashicups-db-1/hashicups-db-1-check status=passing## ...

After the health checks confirm the health of the new external services, the UI updates to show them as passing.

Destroy the infrastructure

Now that the tutorial is complete, clean up the infrastructure you created.

From the ./self-managed/infrastruture/aws folder of the repository, use terraform to destroy the infrastructure.

$ terraform destroy --auto-approve

Next steps

In this tutorial you learned how to register external services to your Consul datacenter and how to access them using the different interfaces provided by Consul: UI, CLI, API, and DNS. You also learned how to use Consul External Service Monitor (ESM) to run health checks over external services and nodes and to keep Consul catalog updated with the results of those health checks.

For more information about the topics covered in this tutorial, refer to the following resources:

• Consul External Service Monitor (ESM)
• Service configuration reference
• Health check configuration reference

To learn more about how Consul service discovery can simplify application deployment and load balancing in your datacenter, refer to the following resources:

• Monitor your application health with distributed checks
• Automate reverse proxy configuration with consul-template